Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tyler

Pages: 1 2 Next
1
We're currently experiencing an issue with the downloads due to the new HTTPS certificate. It'll be up soon! Sorry about the delay.

2
I have the same question.
Can anyone help me to a copy of THUG PRO  ?
much appreciated !
Jos

Are you able to access THUGPro.com? The latest setup .exe is available there.

3
General THPS(X) / THPS1+2 Discussion
« on: May 13, 2020, 09:37:18 am »
With the announcement of Tony Hawk's Pro Skater 1+2 yesterday, I'd love to hear what you guys think! What are your expectations of the game? With THHD and THPS5 flopping, could this be the resurgence we've been looking for?

Personally, my hopes are high since Vicarious Visions and former NS employees are working on the game. Compared to the crapshoot of hope we had in Robomodo, this seems like a safe bet. Judging by the trailer, they seem to be comparing the gameplay to the original very closely.

My only request for the fans is to keep your expectations within the THPS1/THPS2 realm. Getting off your board, reverts, spine transfers, none of these things were in THPS1 and THPS2, so don't bum yourself out with those less than 1% possibilities.

Let me know your thoughts!


 

4
General THPS(X) / Re: Buttslapping in THP8?
« on: July 23, 2019, 01:01:31 pm »
Yeah, I

5
This is a tutorial on how to get THUGPRO 0.6.0.9 installed and running on macOS using Wine.

If you'd prefer this in video form, here you go:
https://youtu.be/vi6PBHwvAFU

These are the specs of my Mac used for this install:
macOS High Sierra 10.13.4
Mac mini (mid 2011)
Processor: 2.3 GHz Intel Core i5
Memory: 4GB 1333 MHz DDR3
Graphics: Intel HD Graphics 3000 384 MB

You will need three things:
THUG2 from the THPSX Discord
THUGPRO Setup from thugpro.com (The Windows/PC installer)
Admin privileges on your Mac

1. Open the Terminal application.

2. Within the terminal, paste this command:
Code: [Select]
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"This will install Homebrew, making it easier to install applications needed for this installation.

This will take a while to install, so be patient.

3. Once that is installed, paste this command to install Wine:
Code: [Select]
brew install Caskroom/cask/xquartz wine winetricks  This will also take some time, be patient again!

4. Now you will need to create your Wine prefix. Type this in the terminal to do so:
Code: [Select]
export WINEPREFIX=~/.wine-thugpro WINEARCH=win32Take note on your wine prefix, you will find it in the $HOME directory.

If you already have this prefix from the Reddit post for the previous THUGPRO version, I would suggest using a different prefix, such as tpro or whatever to differentiate the prefixes.

For your directory to appear in your $HOME, you will need to type:
Code: [Select]
wine wineboot
To navigate there from the Terminal, simply type:
Code: [Select]
open $HOME
To see the folder, you will need to have hidden files and folders turned on.

To turn that on within the Terminal, type the following:
Code: [Select]
defaults write com.apple.finder AppleShowAllFiles YES
You will need to Relaunch Finder in order for this to take effect. (alt-click Finder, click Relaunch)

5. Now it's time to install the needed Winetricks to make this work. Type/paste the following into the Terminal:
Code: [Select]
winetricks dotnet20 dotnet40 mdx vcrun2013
This will take some time to install. Keep your eye on it as you will need to click through the prompts to install these.

6. We need one more Winetrick, but it needs to be force installed. Type the following in the Terminal:
Code: [Select]
winetricks --force dotnet46
You will receive a prompt asking to Repair/Remove the Framework, just select Repair and hit next. Navigate through the rest of the prompts as normal.

7. Once that's finished, it's time to install THUG2.

I will be assuming you are using the THUG2.iso from the Discord. This is the BEST way to install THUG2 on Mac, do not use other installs.

Open Disk Utility. Navigate to File - Open Disk Image, and select the THUG2.iso.

Right click the THUG2 Disk Image in Disk Utility, and select Show in Finder.

Select ALL of the files and paste them within a folder on your Desktop, Documents, anywhere within your Mac that you'll remember.

8. You'll need to navigate to that folder within the Terminal. The easiest method is to type
Code: [Select]
cd followed by a space, and drag the folder that contains your THUG2 files into the terminal window. It should paste the path within the window. Press enter/return.

9. Once you're in the directory of your THUG2 pasted files, type the following within the Terminal:
Code: [Select]
wine setup.exe
This will run the THUG2 setup. Use all of the default locations, it doesn't matter.

Congratulations, THUG2 is now installed.

10. Now it's time to install THUGPro. Create a new folder on your Desktop or Documents, or wherever you'll remember. Place the THUGProSetup.exe within that folder.

Now navigate to that folder within the Terminal. Again, type
Code: [Select]
cd followed by a space and drag that folder into the Terminal window. Press Return/enter.

When you're in that directory in the Terminal, type the following:
Code: [Select]
wine thugprosetup.exe
This will begin the THUGPro Setup.

11. THUGPro will need to know where THUG2 is installed. Simple, it's in the C: drive assuming you installed to the default location. Navigate to the C:\Program Files\Activision\Tony Hawk's Underground 2\Game directory within the Folder Dialog that THUGPro prompted. Select the Game folder and hit OK.

THUGPro will now install.

12. You will notice that an error prompts when the installation is done, this is fine. Don't panic.

To fix this, go to that THUGPro folder you created on your desktop/documents wherever, you will see all the THUGPro files installed here.

Select all of the files and copy them.

You will need to navigate to your Wine prefix within Finder, again you will need hidden folders/files to be shown to do this.

When you're in your prefix, in this case it was .wine-thugpro, navigate accordingly:
Drive_C - Users - <your username> - Local Settings - Application Data - THUG Pro

Paste the files you copied in the THUG Pro folder.

Look at the THUGPro.exe, looks weird right? Remove the underscore from the name. It should be THUGPro.exe, not _THUGPro.exe.

13. Now let's navigate to your wine prefix within the terminal so we can run THUGPro.

In the terminal, type
Code: [Select]
cd followed by a space, and drag the THUGPro folder found in the Application Data folder into the window. Press Return/Enter.

Now type the following:
Code: [Select]
wine thugprolauncher.exe
This will run the Launcher.

IMPORTANT. WINDOWED MODE DOES NOT WORK. DO NOT SELECT IT!

Once you've toyed with your settings, click Play THUGPro!

CREATING A SHORTCUT

Here's how you create a shortcut for THUGPro.

Open Script Editor and create a new document. Paste the following code:
Code: [Select]
on run
   
   --edit this to be the correct location and file to run (typically only edit after the "drive_c")
   set toRun to "$WINEPREFIX/drive_c/Program Files/MyProgram/MyProgramName.exe"
   
   --edit winePrefix if you are not using the default prefix
   set winePrefix to "$HOME/.wine"
   
   --edit wineLocation if your wine install is not the default location
   set wineLocation to "/usr/local/bin"
   
   --edit dyldFallbackLibraryPath to your X11 lib folder, this one is set for XQuartz on 10.6+
   set dyldFallbackLibraryPath to "/opt/X11/lib"

  --Setting freetype rendering to 35 fixes blurred fonts when using newer freetype versions
  set freetypefix to "truetype:interpreter-version=35"
   -------------------------------------------------------
   --DO NOT EDIT ANYTHING BELOW THIS LINE
   -------------------------------------------------------
   set toRunPath to do shell script "WINEPREFIX=\"" & winePrefix & "\"; TEMPVAR=\"" & toRun & "\"; echo \"${TEMPVAR%/*}\""
   set toRunFile to do shell script "WINEPREFIX=\"" & winePrefix & "\"; TEMPVAR=\"" & toRun & "\"; TEMPVAR2=\"" & toRunPath & "\"; echo \"${TEMPVAR#$TEMPVAR2/}\""
   do shell script "PATH=\"" & wineLocation & ":$PATH\"; export WINEPREFIX=\"" & winePrefix & "\"; export DYLD_FALLBACK_LIBRARY_PATH=\"" & dyldFallbackLibraryPath & "\"; export FREETYPE_PROPERTIES=\"" & freetypefix & "\"; cd \"" & toRunPath & "\"; wine \"" & toRunFile & "\" > /dev/null 2>&1 &"
   
end run

Within this code, you will need to change two things:

1. Change the exe path. You only need to change from drive_c onward. It should look similar to this:
Code: [Select]
$WINEPREFIX/drive_c/Users/<your username>/Local Settings/Application Data/THUG Pro/THUGProLauncher.exe
2. The wine prefix. Where it says set winePrefix, change .wine to whatever you made your prefix. (ex. .wine-thugpro)

Once that's done, go to File, Save, and save it as an Application file. Name it, and save it anywhere you want.

Now you'll be able to launch THUGPro from the .app you've created.

INSTALLING CUSTOM LEVELS

Installing custom levels is almost as easy as it is on Windows. Navigate to your wineprefix within Finder.

Go to the THUG Pro folder. You should find it in the
Code: [Select]
drive_c - users - <username> - Local Settings - Application Data - THUG Pro
If you do not have a User folder, you need to launch THUG Pro first.

Assuming that the folder structure within the custom level file .zip/.rar is the recommended structure, you should be able to drag and drop the User folder into the THUG Pro directory and merge the files/folders together. It's that easy.

And that's it. If you have any questions or concerns, let me know.

Sources:
https://wiki.winehq.org/MacOS_FAQ#How_to_create_shortcut.2C_launcher.2C_or_.app_to_start_a_given_.exe.3F
https://www.reddit.com/r/THPS/comments/40zu4q/thugpro_mac_os_x_installation_guide/

6
General THPS(X) / Re: My THUG controller
« on: December 10, 2018, 07:36:08 pm »
Wow, that's SICK! Thanks for sharing!

7
General THPS(X) / The Ultimate THPS Collection Video - TylerLasagna
« on: September 21, 2018, 07:45:00 pm »
Hey guys,

I just uploaded a video showcasing almost all of my THPS collection. Check it out!



HUGE thanks to FreddY, TheAussassin, Krad, and THPSX in general. Feel free to ask any questions about specifics.

8
Whatever / Re: Question
« on: September 14, 2018, 09:53:33 am »
Hello rabbit,

Please try using a VPN while updating/running thugpro. The connection may be blocked in your country.

9
While they can

10
I think this is a fantastic idea. You guys have been pushing out custom decks like crazy! I hope to see this happen.

11
General THPS(X) / Re: I
« on: May 27, 2018, 12:31:03 pm »
All set now, let us know if you continue to have issues.

12
General THPS(X) / Re: I
« on: May 27, 2018, 12:02:10 pm »
At the time of this post, Openspy is currently down. This should be resolved soon. If you'd like to be notified immediately, consider joining the Discord!

13
Other Games / MX vs ATV Unleashed Online Play PATCH
« on: April 18, 2018, 01:08:05 am »
Hello,

sk8ace and I have been working hard on repairing functionality of online play for MX vs ATV Unleashed since it was part of the Gamespy servers. We have updated the .exe to direct all connections to Openspy, and successfully added the option to create new accounts.

Once created, you will be logged in. Please remember your username/password/email.

If you have any difficulty with logging in/creating an account, please contact either myself or sk8ace and we'll do our best to assist you.

FYI - Once you create your "Gamespy" account, this will work for all games that require Uniquenicks, so long as they're directed at Openspy.

Attached is the patched .exe that is REQUIRED for Openspy to work. Just backup and replace your MXvsATV.exe with this one.

We hope to see you guys online!

14
General THPS(X) / Re: Searching for THUG for PC - Physical copy in box
« on: January 25, 2018, 10:42:50 am »


No, I’m still on the lookout! There hasn’t been any listings online yet.
check your PMs if you know how (quite frankly I don't know how)

I PM'd you back. You can access your PM's by clicking the three lines on the top left corner of the forums. Took me a few minutes to figure out lol.

15
General THPS(X) / Re: Searching for THUG for PC - Physical copy in box
« on: January 24, 2018, 06:57:51 pm »
Did you end up finding a copy, Tyler?

No, I

Pages: 1 2 Next